Heavy Hauler 4L65E
The PerformaBuilt Heavy Hauler 4L65E... Durability while maintaining reasonable shift quality. Specifically developed for commercial, heavy towing, and 4X4 vehicles....
Price : $ 4,200.00 Add to cartDescription
The PerformaBuilt Heavy Hauler 4L65E
You are looking at the PerformaBuilt Heavy Hauler Series transmission.
These units are built very similarly to our Pro Race units, but the focus is on durability while maintaining reasonable shift quality. These were specifically developed for commercial, heavy towing, and 4×4 vehicles.
These units feature a heavy duty, 13 vane pump with new bushings, full-time lube modification, and a modified lockup valve to improve the lockup converter’s durability so you can tow confidently in overdrive.
We use a heavy duty wide band for maximum hold in second and fourth gear. To compliment this, we use the Corvette servo. This servo is the largest servo available from GM. It will supply the clamping force needed for these heavy units without the excessively harsh shifts associated with the aftermarket “super servos.”
For Fourth (OD), we use our Performabuilt Proprietary Performance Billet servo. This servo has more holding force than the stock overdrive servo. That, accompanied with the 20 percent wider band, will let you tow in overdrive with confidence. Now you have nearly double the load capabilities of the stock transmission in overdrive.
We use carbon composite friction plates in the forward clutch set. These clutches have an outstanding friction coefficient for maximum holding. They have superior temperature capabilities and they don’t burn easily, even in the worst conditions. This is important because the clutch has to bear the load in every gear except reverse.
For the 3-4 clutch, we use 8 heavy duty friction and steel plates. More friction plates than stock; which is 6 in most cars and trucks. Some additional modifications to the 3-4 set and this clutch pack prevent scoring and burning while increasing holding capability.
We next attack a weak link, the sun shell. In particularly heavy vehicles, vehicles used for heavy loads, and those used for off-roading, constant shifting occurs from first to second and reverse. To address this, we use a Heavy Duty Shell. You will not have to worry about that sudden loss of reverse, 2nd, and 4th gears associated with the breakage of this piece.
Moving on, in the planetary, both sun gears are modified to increase lube flow. This is a must in these heavy duty units. A lack of lube and cooling is a killer when pulling the boat, camper, or work trailer loaded down with equipment. The Heavy Hauler Series uses 4 pinion planetaries.
Lastly, we address the valve body. Here we perform all the updates for lube and durability, and eliminate the partial lockup function in the 4L60E. This greatly extends the converter life and helps to keep everything much cooler. We improve the flow to the 3-4 clutch set, making sure it has enough supply to hold the load on this crucial shift. Finally, we include a low stall heavy duty carbon composite lockup clutch torque converter.
As with all our units shipping is free within the mainland USA. Shipping can be to your residence or any business address with no additional charge. This unit comes with our PerformaBuilt warranty for 2 years regardless of the miles you drive! If it dies, you simply return it, we repair it or replace it, and return it to you. Warranty is limited to repair of the transmission at our facility. We are not responsible for any other loss incurred, such as wages, R&I cost or any other loss.
Additional information
2 YEAR WARRANTY | Please note our Warranty page. This unit comes with a 2 year warranty. |
---|---|
TORQUE CONVERTER | This unit comes with a converter up to a 2400 stall at no additional cost. |
HORSEPOWER RATING | This transmission will support up to 450 RWHP. |
NOTE | All units are available in either 2wd or 4X4. If you have a special application requiring a special adapter or output shaft, please contact us and we will be happy to provide it and quote a price for your special application. |
NOTE FOR LSX | The LSX transmission has a removable bell housing which is not included with our transmission. You will need to use your original bell housing and extension housing, but the transmission will have the appropriate output shaft for your application.These items are available at additional cost. |
NOTE FOR PLANETARY | While this is a direct replacement and considerably stronger than the OEM 4L65E transmission, it does not come with the 5 pinion planetary set. |
YEARS | 4L70E and 2006 TBSS and 2007 up 4L60E/65E/70E CORE CHARGE. Once you receive your PerformaBuilt transmission, send us your buildable core to receive your core charge refund. |
QUESTIONS | If you have any questions feel free to call 1-888-744-6542, or email us at [email protected]. |